01 · Learn the idea
Use the property that answers the question
Mass is the amount of matter measured with a balance or scale; volume is the space occupied, measured in units such as milliliters or cubic centimeters. Solids keep their own shape, liquids flow to fit a container while keeping a nearly fixed volume, and gases spread through available space.
With a teacher, measure the mass of a cork and a steel washer, record their shapes and states, test attraction to a magnet, and gently place them in water. A cork can float and a washer can sink. Sinking or floating compares the object’s overall density with water; being heavy by itself is not enough to predict the result. A hollow shape can change an object’s overall density.
For volume, use a teacher-selected solid that sinks, does not dissolve, fits in a graduated cylinder, and produces a readable change. Set the cylinder on a level surface. Read the bottom of the curved water surface at eye level before and after gently lowering the solid until it is fully underwater. Check for trapped air and avoid splashing. Subtract the starting reading from the ending reading: an invented example of 40 mL rising to 43 mL gives a solid volume of 3 mL, or 3 cubic centimeters. Do not report the final 43 mL as the solid’s volume. A floating cork is not fully submerged, so this simple procedure does not measure its whole volume.
02 · Build understanding
Compare test results
Use this supplied example table, not as a replacement for your own measurements: cork—solid, floats, not attracted to a magnet, does not dissolve; plain steel washer—solid, sinks, attracted, does not dissolve; salt—solid grains, dissolves in water. Dissolving is not the same as melting.
Under teacher supervision, use a low-voltage classroom circuit tester to compare a metal paper clip and a dry plastic strip: the metal can complete the conducting path; the plastic usually cannot. For thermal conduction, a teacher places metal and wooden spoons in warm water and compares how quickly warmth reaches the handles using suitable temperature measurements. Metal conducts thermal energy more readily; wood is a better insulator. Never use outlets or hot plates independently.
Apply and explain
Your turn
Create a property table for teacher-provided safe samples using observations, a balance, a water-volume tool, magnet, and supervised conductivity demonstrations. Record measured mass and volume with units, state, magnetism, water behavior, solubility where suitable, and conductivity. Explain why one property alone cannot identify every sample.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
Measurements depend on the supplied samples. The table should distinguish measured values from observations and from tests not performed. For example, two solids may both sink yet differ in magnetism, and an electrical insulator may be useful even when it cannot complete a circuit. Do not invent a measurement for a missing test. For a fully submerged suitable solid, subtract the starting water reading from the ending reading. Record a volume as not measured when the sample does not meet the method’s conditions.
- Record units and the conditions of tests.
- Use multiple properties to compare at least two samples.
- Distinguish solubility, floating, and conductivity.
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Compare materials with tests: practice →