Learn · Grade 8 Mathematics

Write very large and very small measurements

Connect powers of ten with decimal place value.

Lesson 3 of 3About 30 minutesTEKS 8.2(C)

Original curriculum. These lessons and questions have not been independently reviewed.

01 · Learn the idea

A compact expression of place value

Scientific notation writes a positive magnitude as a × 10ⁿ with 1 ≤ a < 10 and integer exponent n. In an invented storage model, 6,420,000 bytes = 6.42 × 10⁶ bytes. Moving the decimal six places left makes the coefficient; multiplying by 10⁶ restores the original magnitude.

An invented sensor measurement of 0.000084 meter = 8.4 × 10⁻⁵ meter. A negative exponent means divide by a power of ten, not that the measurement is negative. To expand 2.75 × 10⁻³, move the decimal three places left: 0.00275.

02 · Build understanding

Check size and normalization

42 × 10⁴ equals 420,000, but it is not normalized scientific notation because the coefficient is at least 10. Rewrite it as 4.2 × 10⁵. Estimate magnitude before accepting a conversion: a decimal less than 1 must not turn into millions.

03 · Build understanding

Worked example: a large lab count

An invented lab counts 48,300,000 cells in a culture dish. Write the count in scientific notation.

Step 1: Build the coefficient. It needs exactly one nonzero digit in front of the decimal point, so put the point after the 4: 4.83. The zeros at the end are dropped because 4.83 and 4.8300000 are the same number.

Step 2: Count how many places the decimal point moved. In 48,300,000 the point starts at the far right. To land between the 4 and the 8 it passes seven digits, so it moves 7 places.

Step 3: Choose the sign of the exponent. The count is much greater than 10, so the exponent is positive. The answer is 4.83 × 10^7 cells.

Step 4: Check by multiplying back. 10^7 is 10,000,000, and 4.83 × 10,000,000 = 48,300,000. That matches the count.

04 · Build understanding

Worked example: a thin fiber

The same invented lab measures a fiber that is 0.00056 meter thick. Write the thickness in scientific notation.

Step 1: Build the coefficient. The first nonzero digit is 5, so the coefficient is 5.6.

Step 2: Count the places. To get from 0.00056 to 5.6, the decimal point moves 4 places to the right, past three zeros and the 5.

Step 3: Choose the sign. The thickness is less than 1, so the exponent is negative. The answer is 5.6 × 10^(−4) meter.

Step 4: Check by dividing back. 10^(−4) means divide by 10,000, and 5.6 ÷ 10,000 = 0.00056. The fiber is still a small positive length. Only the exponent is negative.

05 · Build understanding

Worked example: back to standard form

Going the other way, the exponent tells you how far to move the decimal point and in which direction.

Step 1: Expand 3.07 × 10^5. The exponent is positive 5, so move the point 5 places to the right. The digits 0 and 7 use up two of those places, and three zeros fill the rest: 307,000.

Step 2: Expand 1.9 × 10^(−3). The exponent is negative 3, so move the point 3 places to the left. Two zeros have to be written between the decimal point and the 1 to make room: 0.0019.

Step 3: Check the sizes. 3.07 × 10^5 should be a few hundred thousand, and 307,000 is. 1.9 × 10^(−3) should be about two thousandths, and 0.0019 is.

06 · Build understanding

Three mistakes to watch for

Counting zeros in place of counting moves. 902,000 ends in three zeros, but the decimal point moves 5 places to reach 9.02. So 902,000 = 9.02 × 10^5. Writing 9.02 × 10^3 gives 9,020.

Using the wrong sign on the exponent. 0.0034 is less than 1, so it is 3.4 × 10^(−3). Writing 3.4 × 10^3 gives 3,400, which is a million times too big.

Leaving a coefficient outside the range from 1 up to 10. 0.25 × 10^6 has the right value, 250,000, but its coefficient is less than 1. Move the point one place right and lower the exponent by one: 2.5 × 10^5.

Apply and explain

Your turn

Convert 7,090,000 and 0.000306 into scientific notation. Expand 5.08 × 10⁴ and 9.1 × 10⁻⁶. Rewrite 63 × 10³ in normalized form and explain why its value stays the same.

Use paper or explain your thinking aloud before opening the solution.

Check your reasoning

7.09 × 10⁶; 3.06 × 10⁻⁴; 50,800; 0.0000091; 6.3 × 10⁴. Dividing the coefficient by 10 and increasing the power by one preserves the product.

  • Use a coefficient from 1 inclusive to 10 exclusive.
  • Choose exponent signs from magnitude.
  • Verify conversions by reversing them.

Ready to practice?

Try the questions, get feedback, and review your reasoning.

Write very large and very small measurements practice →