01 · Learn the idea
Analyze and choose tools
In an invented classroom display, a 2-by-6-meter rectangular design is enlarged by a length scale factor of 1.5. Only its front face needs one coat of paint. The paint model covers 4 m² per liter and comes only in full 3-liter cans. Supplier A charges $18 per can plus $6 delivery; B charges $22 per can with no delivery fee. These are invented planning values.
List what is known and what is not: dimensions, coverage, can size, and cost rules are given; waste and a second coat are not. Choose tools deliberately. Graph paper or a cutout helps compare dimensions; a calculator checks arithmetic; a spreadsheet can organize candidate quantities and costs. Estimate first: the area should become more than twice as large because 1.5² = 2.25.
02 · Build understanding
Solve and connect representations
The enlarged dimensions are 3 by 9 meters, with area 27 m². Required paint is 27/4 = 6.75 liters. Two cans provide 6 liters and are insufficient; three provide 9 liters. Costs at c cans are A = 18c + 6 and B = 22c. At c = 3, A costs $60 and B $66.
Draw the original and enlarged rectangles, make a table for 1–5 cans showing liters and both costs, and graph the two cost rules. The graph helps compare vendors, while the coverage constraint identifies feasible whole-can inputs. A cheap but insufficient quantity is not a valid solution.
03 · Build understanding
Justify, check, and evaluate
Check the area using both scaled dimensions and the area multiplier. Check the smaller whole-can count to justify rounding up. Explain why the result depends on one coat, ideal coverage, and no additional reserve. If the task changes, recompute rather than quietly adding an unstated requirement. A clear argument names the constraint, evidence, units, and conclusion.
04 · Build understanding
Worked example: from a sketch to a tile order
The yearbook club sketches a cork display board as a 20 cm by 30 cm rectangle. The real board is a dilation of the sketch with a length scale factor of 8. The club will cover the board with square cork tiles that are 40 cm on each side, and edge it with trim sold in 5-meter rolls. How many tiles and how many rolls does the club need?
Step 1: Analyze the information. You know the sketch size, the scale factor, the tile size and the roll length. Tiles cover the surface, so they depend on area. Trim goes around the edge, so it depends on perimeter. Those are two different measurements, and each needs its own calculation.
Step 2: Scale the lengths first, because everything else depends on them. 20 × 8 = 160 cm and 30 × 8 = 240 cm. The real board is 160 cm by 240 cm.
Step 3: Count the tiles. Along the short side, 160 ÷ 40 = 4 tiles fit. Along the long side, 240 ÷ 40 = 6 tiles fit. The board takes 4 × 6 = 24 tiles with no cutting.
Step 4: Measure the trim. The perimeter is 2(160 + 240) = 800 cm, which is 8 meters. One roll gives 5 meters, which is too short. Two rolls give 10 meters, so the club needs 2 rolls.
Step 5: Check the tile count a second way. The sketch has an area of 20 × 30 = 600 cm². The area factor is 8² = 64, so the board has an area of 600 × 64 = 38,400 cm². One tile covers 40 × 40 = 1,600 cm², and 24 × 1,600 = 38,400 cm². The two methods agree.
05 · Build understanding
Worked example: choose a store and test the budget
The club has $100 to spend. Store A sells single tiles for $3.50 each. Store B sells tiles only in packs of 5, at $15 a pack. Trim costs $9.50 a roll at either store. Decide where to buy the 24 tiles and whether the whole plan fits the budget.
Step 1: Price the tiles at Store A. The club can buy exactly 24, so the cost is 24 × 3.50 = 84 dollars.
Step 2: Price the tiles at Store B. 24 ÷ 5 = 4.8, and you cannot buy part of a pack. Four packs hold only 20 tiles. Five packs hold 25 tiles and cost 5 × 15 = 75 dollars.
Step 3: Compare. Store B costs 84 − 75 = 9 dollars less, and the club ends up with one spare tile.
Step 4: Add the trim. Two rolls cost 2 × 9.50 = 19 dollars. With Store B, the total is 75 + 19 = 94 dollars.
Step 5: Test the budget. 100 − 94 = 6, so the Store B plan leaves $6. With Store A the total would be 84 + 19 = 103 dollars, which is $3 over. The store choice decides whether the plan works.
Step 6: Judge the answer with an estimate. About 25 tiles at $3 each is $75, and the trim is about $20, so a total near $95 makes sense.
06 · Build understanding
Pick the representation that fits the job
A labeled diagram answers layout questions. Draw the board as a rectangle marked 160 cm by 240 cm, then rule it into 4 columns and 6 rows. Anyone can see that 24 whole tiles fill it.
A table handles purchases that come in whole units. For Store B, packs: 1, 2, 3, 4, 5 and tiles: 5, 10, 15, 20, 25 and cost in dollars: 15, 30, 45, 60, 75. Read down to the first column with at least 24 tiles. That is 5 packs.
An equation states a rule once so you can reuse it. Store A charges C = 3.5n dollars for n tiles. Store B charges C = 15p dollars for p packs. If the club changes the board size, the same rules still work.
Mental math is the fastest check on a calculator. A scale factor of 8 makes the area 64 times as large, and 600 × 60 = 36,000. A calculator answer of 38,400 cm² is close to that estimate. An answer of 4,800 cm² is far too small.
07 · Build understanding
Three mistakes to watch for
Scaling the area by the length scale factor. 600 × 8 = 4,800 cm² would be only 3 tiles, since 4,800 ÷ 1,600 = 3. The true area is 38,400 cm², which takes 24 tiles. An order of 3 tiles would cover one eighth of the board.
Rounding a purchase down. The trim needs 8 ÷ 5 = 1.6 rolls. Rounding to 1 roll leaves 3 meters of the edge bare. When you buy whole units, round up.
Trusting the unit price alone. Store B charges $3 per tile and Store A charges $3.50, so Store B looks cheaper every time. But for 6 tiles, Store A costs 6 × 3.50 = 21 dollars, while Store B needs 2 packs for 30 dollars. Work out the whole order before you decide.
Apply and explain
Your turn
Create the labeled diagram, table, graph, and equations for the display plan. Explain your tool choices and justify the least sufficient quantity and cheaper supplier. Then change only the requirement to two coats, recalculate, and present a short written or oral argument. Answer a partner’s question about why area does not scale by 1.5 alone; working alone, write and answer that challenge.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
One coat needs 3 cans, with A $60 versus B $66. Two coats need 54 m² of coverage, or 13.5 L, requiring 5 cans; A costs $96 and B $110. Dimensions scale by 1.5 in two directions, so area scales by 2.25. The plan should include checks, tool reasoning, and stated assumptions.
- Use analyze-plan-solve-justify-evaluate steps.
- Create and connect diagram, table, graph, and equations.
- Verify whole-container feasibility and both vendors.
- Communicate precise units and respond to a reasoning challenge.
Ready to practice?
Try the questions, get feedback, and review your reasoning.
A scaled display plan practice →