Learn · Grade 8 Mathematics

Length scale and area scale

Use a grid model to explain why area scales differently.

Lesson 3 of 3About 30 minutesTEKS 8.10(D)

Original curriculum. These lessons and questions have not been independently reviewed.

01 · Learn the idea

Count the new square units

Draw a 3-by-4 rectangle on a grid. It has area 12 square units and perimeter 14 units. Dilate by 2 to get a 6-by-8 rectangle. Its area is 48 square units and perimeter 28 units. Each original unit square becomes a 2-by-2 block containing four squares.

Length and perimeter multiply by k; area multiplies by k² because two independent dimensions scale. With k = 1/2, area becomes 1/4 as large. This is not limited to rectangles: a grid subdivision or decomposition shows the same area factor for other two-dimensional shapes.

02 · Build understanding

Avoid mixing dimensions

A logo’s area becoming nine times as large does not mean its side lengths are nine times as large under a positive dilation; the scale factor is 3. Keep units visible: centimeters measure length and square centimeters measure area.

03 · Build understanding

Worked example: a rectangle on the coordinate plane

Rectangle OABC has corners O(0, 0), A(4, 0), B(4, 2) and C(0, 2). Dilate it about the origin with a scale factor of 3, then compare side lengths, perimeter and area.

Step 1: Find the image corners by multiplying both coordinates by 3. O stays at (0, 0). A goes to A′(12, 0), B goes to B′(12, 6) and C goes to C′(0, 6).

Step 2: Compare the side lengths. The original is 4 units by 2 units. The image is 12 units by 6 units. Each side is 3 times as long.

Step 3: Compare the perimeters. The original perimeter is 2(4 + 2) = 12 units. The image perimeter is 2(12 + 6) = 36 units. Since 36 ÷ 12 = 3, the perimeter is multiplied by the scale factor, like any other length.

Step 4: Compare the areas. The original area is 4 × 2 = 8 square units. The image area is 12 × 6 = 72 square units. Since 72 ÷ 8 = 9, the area is multiplied by 9, which is 3².

Step 5: Check why. The image area is (3 × 4) × (3 × 2), and that equals 3 × 3 × (4 × 2), or 9 × 8. On the grid, each unit square of the original turns into a 3 by 3 block of 9 squares, and 8 blocks of 9 make 72. On the graph, join O to A to B to C for the small rectangle and O to A′ to B′ to C′ for the large one.

O (0, 0)A (4, 0)B (4, 2)C (0, 2)A′ (12, 0)B′ (12, 6)C′ (0, 6)
Rectangle OABC is 4 by 2. Its image after a dilation by 3 has corners O, A′, B′ and C′ and is 12 by 6.

04 · Build understanding

Worked example: a sign and its sticker

A warning sign is a right triangle with sides of 15 cm, 20 cm and 25 cm. The 15 cm and 20 cm sides meet at the right angle. A sticker version is a dilation of the sign with a scale factor of 4/5. Find the perimeter and area of the sticker.

Step 1: Scale each side, because every length is multiplied by 4/5. 15 × 4/5 = 12 cm, 20 × 4/5 = 16 cm and 25 × 4/5 = 20 cm.

Step 2: Find both perimeters. The sign has a perimeter of 15 + 20 + 25 = 60 cm. The sticker has a perimeter of 12 + 16 + 20 = 48 cm. That is 60 × 4/5, so the perimeter used the scale factor once.

Step 3: Find both areas from the two sides that meet at the right angle. The sign has an area of 1/2 × 15 × 20 = 150 cm². The sticker has an area of 1/2 × 12 × 16 = 96 cm².

Step 4: Check with the area factor. Area is multiplied by the scale factor twice: 4/5 × 4/5 = 16/25. Then 150 × 16/25 = 96 cm², which matches Step 3.

Step 5: Read the units. The perimeters are in centimeters and the areas are in square centimeters. The sticker keeps 4/5 of the length but only 16/25 of the area, which is less than 2/3 of it.

05 · Build understanding

Worked example: from area back to scale factor

A patio plan is a 7 by 3 rectangle, so its area is 21 square units and its perimeter is 20 units. A builder wants a dilated patio with an area of 336 square units. Find the scale factor and the new perimeter.

Step 1: Compare the areas, image over original. 336 ÷ 21 = 16, so the area is 16 times as large.

Step 2: Undo the squaring. The area factor is the scale factor times itself, and 4 × 4 = 16. The scale factor is 4.

Step 3: Use the scale factor for the perimeter. Perimeter is a length, so it is multiplied by 4: 20 × 4 = 80 units.

Step 4: Check with the real dimensions. The new patio is 28 by 12. Its area is 28 × 12 = 336 square units and its perimeter is 2(28 + 12) = 80 units. Both agree.

06 · Build understanding

Three mistakes to watch for

Multiplying an area by the scale factor only once. A shape with an area of 10 square units, dilated by 4, has an area of 160 square units, because 4² = 16. An answer of 40 scales one direction and forgets the other.

Squaring the scale factor for a perimeter. A shape with a perimeter of 22 units, dilated by 5, has a perimeter of 110 units. An answer of 550 uses the area factor 25 on a length.

Forgetting that a shrink is squared too. With a scale factor of 1/3, a side of 9 units becomes 3 units, but an area of 90 square units becomes 10 square units, because 1/3 × 1/3 = 1/9. The area shrinks faster than the sides do.

Apply and explain

Your turn

Use a grid to dilate a 4-by-6 rectangle by 3/2. Compare both side lengths, perimeter, and area before and after. Explain the area factor with multiplication. Then find the positive dilation factor that changes an area from 20 to 80 square units.

Use paper or explain your thinking aloud before opening the solution.

Check your reasoning

The image is 6 by 9; perimeter changes 20 to 30 and area 24 to 54. Length/perimeter factor is 1.5 and area factor is 2.25. Area ratio 80/20 = 4 implies positive length factor 2.

  • Draw a labeled grid model.
  • Use k for linear and k² for area measurements.
  • Check area ratios against dimensions.

Ready to practice?

Try the questions, get feedback, and review your reasoning.

Length scale and area scale practice →