01 · Learn the idea
Multiply both coordinates
Plot triangle A(1,1), B(5,1), C(1,4). Dilating about the origin by k = 2 gives A′(2,2), B′(10,2), C′(2,8). Each image point lies on the same ray from the origin as its original, twice as far away. Both coordinates must be multiplied, not just the positive ones or just one axis.
AB = 4 and AC = 3; A′B′ = 8 and A′C′ = 6. Every corresponding side has image/original ratio 2. Angles stay equal, so the triangles are similar. A dilation with k = 1/2 makes sides half as long; k = 1 keeps the figure unchanged.
02 · Build understanding
Compare attributes
Dilation changes lengths for k ≠ 1 and therefore usually changes size, while preserving shape and angle measures. A side length or perimeter is multiplied by k. Coordinates may be negative or zero: with k = 3/2, (−4,2) maps to (−6,3), and the origin stays fixed.
03 · Build understanding
Worked example: enlarge a triangle by 3
Triangle RST has vertices R(2, 1), S(5, 1) and T(5, 5). Dilate it about the origin with a scale factor of 3, then compare the two triangles.
Step 1: Write the rule. A dilation centered at the origin multiplies both coordinates by the scale factor, so the rule is (x, y) → (3x, 3y).
Step 2: Apply the rule to every vertex. R(2, 1) goes to R′(6, 3). S(5, 1) goes to S′(15, 3). T(5, 5) goes to T′(15, 15).
Step 3: Find the side lengths of the original. RS is horizontal, so count across: 5 − 2 = 3 units. ST is vertical: 5 − 1 = 4 units. RT is the slanted side of a right triangle with legs 3 and 4. Because 3² + 4² = 25 and 5² = 25, RT = 5 units.
Step 4: Find the side lengths of the image the same way. R′S′ = 15 − 6 = 9 units and S′T′ = 15 − 3 = 12 units. For the slanted side, 9² + 12² = 81 + 144 = 225, so R′T′ = 15 units.
Step 5: Compare matching sides, image over original. 9/3 = 3, 12/4 = 3 and 15/5 = 3. Every ratio equals the scale factor, so the sides are proportional. The perimeter follows the same pattern: it goes from 12 units to 36 units.
Step 6: Check with the origin. For R(2, 1), the y-coordinate is half the x-coordinate. For R′(6, 3), 3 is half of 6. Both points sit on the same line through the origin, and R′ is 3 times as far out. On the graph, join R to S, S to T and T to R to see the small triangle, then do the same with R′, S′ and T′.
04 · Build understanding
Worked example: shrink a logo with a fraction
A designer draws a rectangular logo on a grid where each unit is 1 centimeter. Its corners are W(−8, 4), X(4, 4), Y(4, −4) and Z(−8, −4). For a business card, the logo has to shrink to 3/4 of its size. The dilation is centered at the origin.
Step 1: Write the rule. Multiply both coordinates by 3/4: (x, y) → (3x/4, 3y/4). The scale factor is between 0 and 1, so expect a smaller image.
Step 2: Apply the rule to each corner. W(−8, 4) goes to W′(−6, 3). X(4, 4) goes to X′(3, 3). Y(4, −4) goes to Y′(3, −3). Z(−8, −4) goes to Z′(−6, −3). A negative coordinate stays negative, because 3/4 is positive.
Step 3: Measure both rectangles. The original is 4 − (−8) = 12 cm wide and 4 − (−4) = 8 cm tall. The image is 3 − (−6) = 9 cm wide and 3 − (−3) = 6 cm tall.
Step 4: Compare matching sides. 9/12 = 3/4 and 6/8 = 3/4. The ratios are equal, so the small logo is similar to the large one. All four corners are still right angles.
Step 5: Check with the perimeter. The original perimeter is 2(12 + 8) = 40 cm. The image perimeter is 2(9 + 6) = 30 cm. And 30/40 = 3/4, the scale factor again. On the graph, join W to X to Y to Z and back to W for the large logo, and the primed points in the same order for the small one.
05 · Build understanding
Test whether two shapes are similar
You can run the idea backward. If one shape is a dilation of another, every pair of matching sides has the same ratio. If the ratios differ, no dilation connects the two shapes.
Take a 6 by 10 rectangle and a 9 by 15 rectangle. The ratios are 9/6 = 1.5 and 15/10 = 1.5. They match, and every angle in both rectangles is 90°, so the rectangles are similar and the scale factor is 1.5.
Now take a 6 by 10 rectangle and a 9 by 13 rectangle. The ratios are 9/6 = 1.5 and 13/10 = 1.3. Each side grew by 3 units, but adding the same amount to every side changes the shape. These rectangles are not similar.
Write the ratio as image over original every time. If a side of 10 becomes a side of 4, the scale factor is 4/10 = 2/5, which is a shrink. The ratio 10/4 = 5/2 describes the trip back from the small shape to the large one.
06 · Build understanding
Three mistakes to watch for
Multiplying only one coordinate. With a scale factor of 2, the point (3, 5) goes to (6, 10). Writing (6, 5) stretches the figure sideways only, so its shape changes and the image is no longer similar.
Adding the scale factor. Sending (3, 5) to (5, 7) uses the rule (x + 2, y + 2). That slides the figure without changing its size. A dilation multiplies.
Expecting the angles to grow. Triangle RST has a right angle at S, and triangle R′S′T′ has a right angle at S′. The sides became 3 times as long. The angles stayed exactly the same.
Apply and explain
Your turn
Plot the lesson triangle and its images for k = 2 and k = 1/2. Label coordinates and compare corresponding horizontal and vertical sides. Explain what happens to angles, distance from the origin, and shape. Apply k = 3/2 to the vertices (−4,2),(0,2),(−4,6).
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
The half-size image is (0.5,0.5),(2.5,0.5),(0.5,2); corresponding sides have ratios 2 or 1/2. Angles remain equal and origin distances scale by k. The final image is (−6,3),(0,3),(−6,9).
- Use the origin as dilation center.
- Multiply both coordinates consistently.
- Compare length ratios and invariant angles.
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Dilate a coordinate figure practice →