01 · Learn the idea
Read the design goal first
A fictional school design challenge asks for a tray that keeps ten wooden blocks inside during a gentle, teacher-controlled table movement. Each tested empty tray must have a mass no greater than 120 g and must retain all ten blocks in each of three trials. These are the two announced requirements.
Invented prototype results: P—90 g, blocks retained 10, 9, 10; Q—110 g, blocks retained 10, 10, 10; R—140 g, blocks retained 10, 10, 10. Record the results in a table with separate columns for mass and each trial. Q is the only design that meets both requirements in these supplied tests.
02 · Build understanding
Use a model honestly
Sketch a possible next tray with labeled sides and a base. The table does not give the tested prototypes’ exact shapes, so do not pretend the sketch shows a known successful design. Label it proposed and state which feature you would test next.
A small classroom test allows repeated comparisons, but it does not reproduce every drop, weather condition, load, or shipping material. Meeting the classroom goal does not prove a tray will protect every real shipment. A design with taller sides might keep blocks in but might also add mass; the idea needs a new test.
03 · Build understanding
Discuss the evidence
Tell a partner which prototype you recommend and why. The listener first restates the recommendation accurately, then asks about a criterion or trial. Discuss the design and evidence rather than attacking the person. If a new result changes whether a requirement is met, revise the recommendation.
Apply and explain
Your turn
Make the results table, recommend a prototype using both requirements, and explain why the other two do not meet the whole goal. Draw one proposed change and name what you would measure in a new test. Record your partner’s relevant question and your response.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
Q meets the 120-g limit at 110 g and retains all ten blocks in all three trials. P meets the mass limit but loses a block in trial 2; R keeps the blocks but exceeds the mass limit. A proposed side change needs measurements of both mass and block retention. The sketch is a hypothesis, not a picture proven by the supplied data.
- Check every announced requirement.
- Support the recommendation with the supplied numbers.
- Label the proposed model and explain its limits and a peer question.
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Choose a prototype using stated criteria practice →