01 · Learn the idea
A circuit must be closed
Electrical energy travels only around a complete path. A circuit needs a source such as a battery, conducting wires, and something that uses the energy such as a bulb, joined in an unbroken loop.
If the loop is broken anywhere, nothing flows and the bulb does not light. A broken loop is an open circuit and a complete one is a closed circuit.
02 · Build understanding
Testing the path
Disconnect one wire from a working circuit and the bulb goes out immediately, even though the battery and bulb are unchanged.
That single test shows the path matters, not just the parts. A switch works by deliberately opening and closing the loop.
battery → wire → bulb → wire → battery: closed loop
03 · Build understanding
Light and heat together
A bulb turns electrical energy into light, and it also produces thermal energy. That is why a bulb left on becomes warm.
Most of the energy in an older filament bulb becomes heat rather than light, which is why such bulbs are inefficient for lighting and why some appliances use the heating effect on purpose.
04 · Build understanding
Working safely
Classroom circuits use small batteries, which are safe to handle. Mains electricity from a wall socket is not, and must never be used for an experiment.
Never connect a wire from one battery terminal straight to the other. That is a short circuit, and it makes the wire and the battery hot very quickly.
Apply and explain
Your turn
List what a simple circuit needs and explain why the loop must be closed. Describe a test showing the path matters and explain how a switch works. Explain what two forms of energy a bulb produces. Then give two circuit safety rules with the reason for each.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
A simple circuit needs a source such as a battery, conducting wires, and something that uses the energy such as a bulb, all joined in an unbroken loop. The loop must be closed because electrical energy travels only around a complete path, so if the loop is broken anywhere nothing flows and the bulb does not light. To show that the path matters, disconnect one wire from a working circuit: the bulb goes out at once even though the battery and bulb are unchanged. A switch works on the same principle, opening and closing the loop deliberately. A bulb produces light and also thermal energy, which is why a bulb left on becomes warm, and in an older filament bulb most of the energy becomes heat rather than light. Two safety rules: never use mains electricity from a wall socket for an experiment, because the voltage is dangerous, unlike the small batteries used in a classroom; and never connect a wire from one battery terminal directly to the other, because that short circuit makes the wire and the battery hot very quickly.
- Three circuit components and the closed-loop requirement.
- The disconnection test and the switch explanation.
- Both energy outputs, and two safety rules each with a reason.
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Matter, forces and energy practice →