Learn · Physics

Construct and test two circuit arrangements

Construct and test two circuit arrangements

Lesson 3 of 4About 110 minutesTEKS §112.45(c)(6)(D)TEKS §112.45(c)(6)(E)

Original curriculum. These lessons and questions have not been independently reviewed.

01 · Learn the idea

Design before connecting

Use a teacher-approved 3 V battery supply, switch, wires, 100 Ω and 200 Ω resistors rated at least 0.25 W, and appropriate meters. Use only the approved low-voltage supply. Disconnect power before changing wiring; have the teacher check the schematic, current-meter range, and connections. Never connect an ammeter directly across a battery.

For ideal 3 V and series 100 Ω+200 Ω, equivalent resistance 300 Ω and current 0.010 A. Drops are 1 V and 2 V; powers 0.010 W and 0.020 W. Draw the ammeter in series and voltmeter across the measured resistor. Read https://openstax.org/books/physics/pages/19-2-series-circuits and https://openstax.org/books/physics/pages/19-4-electric-power .

02 · Build understanding

Build the parallel comparison

In parallel both resistors have 3 V. Branch currents 0.030 A and 0.015 A sum to 0.045 A, equivalent resistance≈66.7 Ω; branch powers 0.090 W and 0.045 W. Read https://openstax.org/books/physics/pages/19-3-parallel-circuits .

Construct both circuits, measure the battery’s loaded voltage, each voltage drop, and each branch/current value. Take three readings per quantity and compare with V=IR and P=VI using actual measured resistance if available. Explain tolerances, meter influence, and battery internal resistance as possible departures from ideal values.

Apply and explain

Your turn

Submit both checked schematics, constructed-circuit records, measurement tables, and calculations for every element. Explain why total current changes when the same resistors are rearranged.

Use paper or explain your thinking aloud before opening the solution.

Check your reasoning

Parallel provides two paths and lower equivalent resistance. Current is not consumed by a resistor; electrical energy is transferred. Real predictions should use the measured supply voltage.

  • Both physical circuits
  • Meter placement and safety
  • V/I/R/P per element
  • Repeated data
  • Ideal/real comparison

Ready to practice?

Try the questions, get feedback, and review your reasoning.

Construct and test two circuit arrangements practice →