Learn · Physics

Measure light through a rotated analyzer

Measure light through a rotated analyzer

Original curriculum. These lessons and questions have not been independently reviewed.

01 · Learn the idea

Measure the angular dependence

Use a diffuse low-intensity lamp, two linear polarizing sheets, a protractor, and a light sensor in a fixed arrangement. Keep the first polarizer fixed. Record a dark/background reading, then take three readings at analyzer angles 0°, 30°, 45°, 60°, 90° relative to the first polarizer. Keep source distance and detector position fixed and avoid sensor saturation. Do not look into intense light sources.

For ideal linearly polarized light incident on an analyzer, I=I₀cos²θ, where I₀ is intensity entering the analyzer, after the first polarizer. If the original source is unpolarized, an ideal first polarizer transmits half its intensity. Do not halve the already-polarized intensity again at zero angle. Reference: https://openstax.org/books/university-physics-volume-3/pages/1-7-polarization .

02 · Build understanding

Interpret and apply

Subtract measured background appropriately, normalize to the zero-angle reading, and plot I/I₀ against cos²θ. Predict ratios 1, 0.75, 0.5, 0.25, 0 at the five angles; discuss imperfect polarizers, alignment, and background if 90° is not dark.

Some 3-D cinema systems separate two images by polarization; not every 3-D system uses the same polarizer arrangement. LCDs use liquid-crystal control of light polarization with polarizers to regulate transmission. Observe a suitable LCD through a rotating sheet and compare with the two-sheet setup.

Apply and explain

Your turn

Submit fifteen readings, background treatment, normalized plot, uncertainty analysis, and explanations of the two applications. State which intensity your formula uses.

Use paper or explain your thinking aloud before opening the solution.

Check your reasoning

The law applies to polarized light reaching the analyzer. A real residual at crossed angles does not establish that the ideal formula predicts a nonzero result.

  • Actual readings at five angles
  • Correct I₀ definition
  • Normalized plot
  • Imperfection analysis
  • LCD and 3-D explanation

Ready to practice?

Try the questions, get feedback, and review your reasoning.

Measure light through a rotated analyzer practice →