01 · Learn the idea
Name sides relative to the angle
For an acute angle θ in a right triangle, sinθ=opposite/hypotenuse, cosθ=adjacent/hypotenuse, and tanθ=opposite/adjacent. Similarity makes each ratio depend on the angle rather than triangle size. The hypotenuse is always opposite the right angle; the other side names depend on θ.
A model ramp rises 1.2 m over a horizontal run of 5 m. Its incline θ satisfies tanθ=1.2/5, so θ≈13.50° using inverse tangent in degree mode. The sloping length is √(5²+1.2²)≈5.14 m. This is a measurement example, not a building-code recommendation.
02 · Build understanding
Measure and evaluate
Build a small cardboard incline, measure rise and horizontal run, and estimate its angle with a protractor. Compute the angle from inverse tangent and compare. If the difference is large, check whether the “run” was measured horizontally or along the slope. To find a height from a known horizontal distance d and elevation angle θ, use d tanθ and add the observer’s instrument height if needed.
Apply and explain
Your turn
Measure a cardboard incline, calculate its angle, and compare to a protractor reading. Then model a marker seen at elevation 32° from an instrument 8 m horizontally away and 1.5 m above the marker’s base. Find the marker height.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
Record the actual model measurements and measurement uncertainty. For the stated marker, height=1.5+8tan32°≈6.50 m; 8tan32° alone measures only the rise above the instrument.
- Side labels relative to angle
- Degree mode used
- Observer height included
- Real measurements compared
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Choose a trigonometric ratio for a measurement practice →