01 · Learn the idea
Plan a water-only investigation
With teacher supervision, use an insulated cup calorimeter, balance, temperature probe, and measured masses of cool and mildly warm water. The teacher supplies warm water no hotter than 40°C for this activity. Wear required eye protection, secure the probe, and keep water away from electronics. Record cup mass, water masses, both initial temperatures, and a time series after mixing. Repeat at least three trials with comparable starting conditions.
For an ideal model, assume no heat escapes and the cup absorbs negligible heat. Then q_warm+q_cool=0 and q=mc(T_final−T_initial). Use c_water≈4.184 J/(g·°C) over this classroom range. Temperature changes in °C and K have the same numerical size. Source: https://openstax.org/books/chemistry-2e/pages/5-2-calorimetry .
02 · Build understanding
Compare prediction to evidence
For an illustrative 50.0 g warm sample at 40.0°C and 50.0 g cool sample at 20.0°C, the ideal final temperature is 30.0°C. Each sample transfers about 2092 J in magnitude, with warm negative and cool positive. Real measurements need not match exactly: the cup and surroundings exchange energy, sensors lag, and starting temperatures may change during transfer.
For unequal masses of the same liquid under the ideal assumptions, T_final=(m₁T₁+m₂T₂)/(m₁+m₂). This is a mass-weighted average, not automatically the midpoint. A calorimeter reduces unwanted exchange; it does not guarantee perfect isolation.
Apply and explain
Your turn
Submit actual temperature-time graphs and heat-balance calculations for three trials. Compare measured and predicted final temperatures, identify an error direction where justified, and propose a concrete modification that reduces heat exchange.
Use paper or explain your thinking aloud before opening the solution.
Check your reasoning
Use the actual mass and temperature readings; the illustrative 30°C result is not a substitute for measured data. Heat loss to cooler surroundings tends to lower the mixture temperature relative to the ideal isolated prediction. A lid and better insulation may help, but the cup’s heat capacity and transfer delay still need consideration.
- Actual repeated data
- Signed q values
- Mass-weighted temperature
- Specific heat units
- Model error evaluated
Ready to practice?
Try the questions, get feedback, and review your reasoning.
Measure heat transfer with a calorimeter practice →